Hola, buenas tardes, a ver si podeis ayudarme.
Vereis,  he comprado un DVD de sobtremesa y reproduce DVD, VCE, JPEG, MP3, y no se que mas, pero algunas pelis que tengo grabadas  no se ven, solo aparecen  rayas y cuadros de colores y el sonido es solo ruido. En la parte superior izquierda de la pantalla del TV, una vez cargado el disco aparece VCD1.1. sin embargo cuando aparece VCD2, sí que se ven perfectamente.
En el manual de instrucciones hay un apartado explicando que hay dos versiones  de VCD, la version 1.1 y la version 2, pero no dice nada el porqué no se vé la primera de ellas.
Si sabeis algo por favor decirmelo. Gracias por vuestra ayuda
Saludos.

Video CD 1.1
This is the most basic Video CD specification dating back to 1993 4 , which has the followingcharacteristics:
• One mode 2 mixed form ISO-9660 track containing file pointers to the information areas.
• Up to 98 multiplex-ed mpeg-1 audio/video streams or cd-da audio tracks.
• Up to 500 mpeg sequence entry points used as chapter divisions.
The Video CD specification requires the multiplex-ed mpeg-1 stream to have a cbr of less than 174300 bytes (1394400 bits) per second 5 in order to accommodate single speed cd-rom drives. The specification allows for the following two resolutions 6 :
• 352 x 240 @ 29.97 Hz (ntsc sif).
• 352 x 240 @ 23.976 Hz (film sif).
The cbr mpeg-1, layer II audio stream is fixed at 224 kbps with 1 stereo or 2 mono channels.It is recommended to keep the video bit-rate under 1151929.1 bps 7.

Video CD 2.0
About two years after the Video CD 1.1 specification came out, an improved Video CD 2.0 standard was published in 1995. This one added the following items to the features already available in the Video CD 1.1 specification:
• Support for mpeg segment play items (SPI ), consisting of still pictures, motion pictures and/or audio (only) streams was added. See Section 1.6.2 [Segment Items], page 9.
• Support for interactive playback control (PBC) was added.
• Support for playing related access by providing a scan point index file was added.('/EXT/SCANDATA.DAT')
• Support for closed captions.
• Support for mixing ntsc and pal content.
By adding PAL support to the Video CD 1.1 specification, the following resolutions became
available:
• 352 x 240 @ 29.97 Hz (ntsc sif).
• 352 x 240 @ 23.976 Hz (film sif).
• 352 x 288 @ 25 Hz (pal sif).
For segment play items the following audio encodings became available:
• Joint stereo, stereo or dual channel audio streams at 128, 192, 224 or 384 kbit/sec bit-rate.
• Mono audio streams at 64, 96 or 192 kbit/sec bit-rate.

extraido de ...

http://www.videohelp.com/vcd

Saludos  

Muchas gracias por responder a mi pregunta, hyrax.